{"title":"VORTEX","description":null,"products":[{"product_id":"still-spirits-vortex-air-cooled-condenser","title":"Still Spirits Vortex Air Cooled Condenser","description":"\u003ch2 dir=\"ltr\"\u003eThis modern condenser operates without any need for water, pumps and hoses.\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eThe VORTEX is an air-cooled condenser, so you can operate anywhere without a water line, a pump or a bucket of ice. It saves hundreds of litres of water while also being easy to use and effective for cooling.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInstead of water, it uses forced air to pull heat out of the vapour and liquid. It connects to any 2\" tri-clamp setup and works seamlessly with CREATE+ components, so you can use it as a direct swap for a water-cooled condenser. It can be set up for both reflux and pot designs, so it suits whichever way you like to run.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eHow it works:\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eVapour and liquid travel through two internal tubes surrounded by aluminium fins. The fins soak up the heat and three built-in fans blow it away.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA single control dial sets the fan speed. Turn it up for more cooling, down for less. It’s the same idea as adjusting water flow on a traditional condenser, just quicker and with nothing to plumb in. These condensers can be used as a reflux condenser, lyne arm or product condenser depending on the setup.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eIncludes:\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVORTEX Air Cooled Condenser Module\u003c\/li\u003e\n\u003cli\u003eUniversal power supply (AU\/NZ, US\/CA, UK, EU)\u003c\/li\u003e\n\u003cli\u003eInstruction booklet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eGaskets and tri-clamps are sold separately.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eSpecifications:\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eDimensions: H 16.1 cm x W 13.3 cm x D 60 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eMounting on a Still Spirits Boiler Lid or Alembic Dome:\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Still Spirits Boiler Lid and Alembic Dome are designed for small to medium setups without heavy, off-centre attachments. They have a bit of flex but will happily support components within these limits:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eTotal column and condenser height up to 1.1 m above the lid or dome\u003c\/li\u003e\n\u003cli\u003eTotal column and condenser weight up to 11 kg, including up to 2 kg of off-centre weight (from a swan neck, lyne arm, or a condenser running parallel to the column) offset up to 160 mm from the main column\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eWe recommend adding external support if:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYour column and condenser go beyond those limits\u003c\/li\u003e\n\u003cli\u003eYour lyne arm is angled or runs out perpendicular from the column, putting a lot of weight well off-centre\u003c\/li\u003e\n\u003cli\u003eYour column and condenser are noticeably leaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eCleaning:\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eDust can build up in the fan grill and fins over time. A household vacuum cleaner sorts that out easily.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTo clean the inside, do a run with equal parts white vinegar and water.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eHandle with care:\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe metal fins can have sharp edges. Take care when handling, assembling, cleaning or storing the unit, and don’t run your fingers along the fins.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003ePlease note:\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eIn Australia, distilling alcohol and owning distilling equipment is illegal without the appropriate permits or licences. For guidance, contact your relevant local authorities.\u003c\/p\u003e","brand":"Still Spirits","offers":[{"title":"Default Title","offer_id":67857327063294,"sku":"57000","price":299.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0077\/9832\/5321\/files\/VortexModuleFront3QTR57000LR_jpg.webp?v=1793066077"},{"product_id":"still-spirits-vortex-reflux-equipment-kit","title":"Still Spirits Vortex Reflux Equipment Kit","description":"\u003ch2 dir=\"ltr\" aria-level=\"4\"\u003eModular reflux condenser kit built around Vortex water free condensers.\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eThe VORTEX Reflux Equipment Kit lets you run a full reflux setup without a drop of cooling water. No water line, no pump, no bucket of ice, and hundreds of litres of water saved every run, without giving up speed or quality.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe kit includes two VORTEX air-cooled condenser modules, CREATE+ 2\" modular components, and all the tri-clamps and gaskets to connect them. One VORTEX does the job of your condenser and the other replaces your dephlegmator.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt’s also a 2-in-1 kit. The same components can be reconfigured for water-free alembic distillation, so you can switch between reflux and pot style runs with the one set of gear. This means will not need to purchase a seperate alembic kit to use this equipment in pot mode.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eHow it works\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eEach VORTEX uses forced air instead of water to pull heat out of the vapour and liquid. Vapour and liquid travel through two internal tubes surrounded by aluminium fins. The fins soak up the heat and three built-in fans blow it away.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA single control dial on each unit sets the fan speed. Turn it up for more cooling, down for less. It’s the same idea as adjusting water flow on a traditional condenser or dephlegmator, just quicker and with nothing to plumb in.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eSetting up\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eAssemble the CREATE+ components and VORTEX modules following the included instructions. Attach the setup to your boiler (\u003cstrong\u003esold separately\u003c\/strong\u003e), plug in the power and you’re ready to go.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat’s included\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e2 x VORTEX Air Cooled Condenser Module\u003c\/li\u003e\n\u003cli\u003e2 x Universal power supply (AU\/NZ, US\/CA, UK, EU)\u003c\/li\u003e\n\u003cli\u003eInstruction booklet\u003c\/li\u003e\n\u003cli\u003e500 mm straight section tube\u003c\/li\u003e\n\u003cli\u003eCREATE+ 90° thermowell elbow\u003c\/li\u003e\n\u003cli\u003eCREATE+ 90° elbow\u003c\/li\u003e\n\u003cli\u003e2 x CREATE+ 45° elbow\u003c\/li\u003e\n\u003cli\u003eCREATE+ vented collection cup\u003c\/li\u003e\n\u003cli\u003eCREATE+ beeping alarm thermometer\u003c\/li\u003e\n\u003cli\u003e2\" sieved gasket\u003c\/li\u003e\n\u003cli\u003e9 x 2\" silicone gaskets\u003c\/li\u003e\n\u003cli\u003e8 x 2\" tri-clamps\u003c\/li\u003e\n\u003cli\u003e100 g copper saddles\u003c\/li\u003e\n\u003cli\u003e500 g stainless steel saddles\u003c\/li\u003e\n\u003cli\u003eCeramic boil enhancers\u003c\/li\u003e\n\u003cli\u003eTether system\u003c\/li\u003e\n\u003cli\u003e1 m silicone tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eKey features\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eConnects to 2\" tri-clamp distilling accessories\u003c\/li\u003e\n\u003cli\u003eReplaces a water-cooled condenser and\/or dephlegmator for water-free distilling\u003c\/li\u003e\n\u003cli\u003e304 grade stainless steel components and product tubes\u003c\/li\u003e\n\u003cli\u003e1060 grade aluminium fins\u003c\/li\u003e\n\u003cli\u003eHigh-temperature, food-grade silicone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eDimensions: H 37 cm x W 33 cm x D 61 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eMounting on a Still Spirits Boiler Lid or Alembic Dome\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Still Spirits Boiler Lid and Alembic Dome are designed for small to medium setups without heavy, off-centre attachments. They have a bit of flex but will happily support components within these limits:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eTotal column and condenser height up to 1.1 m above the lid or dome\u003c\/li\u003e\n\u003cli\u003eTotal column and condenser weight up to 11 kg, including up to 2 kg of off-centre weight (from a swan neck, lyne arm, or a condenser running parallel to the column) offset up to 160 mm from the main column\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eWe recommend adding external support if:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYour column and condenser go beyond those limits\u003c\/li\u003e\n\u003cli\u003eYour lyne arm is angled or runs out perpendicular from the column, putting a lot of weight well off-centre\u003c\/li\u003e\n\u003cli\u003eYour column and condenser are noticeably leaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eCleaning\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eDust can build up in the fan grills and fins over time. A household vacuum cleaner sorts that out easily.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTo clean the inside, do a run with equal parts white vinegar and drinking water.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eHandle with care\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe metal fins can have sharp edges. Take care when handling, assembling, cleaning or storing the units, and don’t run your fingers along the fins.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003ePlease note\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eIn Australia and many other countries, distilling alcohol and owning distilling equipment is illegal without the appropriate permits or licences. For guidance, contact your relevant local authorities.\u003c\/p\u003e","brand":"Still Spirits","offers":[{"title":"Default Title","offer_id":67862755901694,"sku":"57001","price":1099.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0077\/9832\/5321\/files\/Vortex_Reflux_Front_57001_LR_b2a1517b-00fa-410a-9e9b-88d01d3cd93a.jpg-2.webp?v=1793071892"},{"product_id":"still-spirits-vortex-alembic-equipment-kit","title":"Still Spirits Vortex Alembic Equipment Kit","description":"\u003ch2 dir=\"ltr\" aria-level=\"4\"\u003eModular alembic pot condenser kit built around Vortex water free condensers.\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eThe VORTEX Alembic Equipment Kit lets you run a traditional alembic setup without a drop of cooling water. No water line, no pump, no bucket of ice, and hundreds of litres of water saved every run, without giving up speed or quality.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe kit includes a VORTEX air-cooled condenser, CREATE+ 2\" modular components, and all the tri-clamps and gaskets to connect them. Add your copper dome and boiler and you’ve got a complete pot condenser that runs anywhere there’s a power point.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eHow it works\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe VORTEX uses forced air instead of water to pull heat out of the vapour and liquid. Vapour and liquid travel through two internal tubes surrounded by aluminium fins. The fins soak up the heat and three built-in fans blow it away.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA single control dial sets the fan speed. Turn it up for more cooling, down for less. It’s the same idea as adjusting water flow on a traditional condenser, just quicker and with nothing to plumb in.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eSetting up\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eAssemble the CREATE+ components and VORTEX condenser following the included instructions. Attach the setup to your copper dome and boiler (\u003cstrong\u003eboth sold separately\u003c\/strong\u003e), plug in the power and you’re ready to go.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat’s included\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVORTEX Air Cooled Condenser Module\u003c\/li\u003e\n\u003cli\u003eUniversal power supply (AU\/NZ, US\/CA, UK, EU)\u003c\/li\u003e\n\u003cli\u003eInstruction booklet\u003c\/li\u003e\n\u003cli\u003eCREATE+ 90° thermowell elbow\u003c\/li\u003e\n\u003cli\u003eCREATE+ 90° elbow\u003c\/li\u003e\n\u003cli\u003eCREATE+ 45° elbow\u003c\/li\u003e\n\u003cli\u003eCREATE+ vented collection cup\u003c\/li\u003e\n\u003cli\u003eCREATE+ beeping alarm thermometer\u003c\/li\u003e\n\u003cli\u003e6 x 2\" silicone gaskets\u003c\/li\u003e\n\u003cli\u003e5 x 2\" tri-clamps\u003c\/li\u003e\n\u003cli\u003eCeramic boil enhancers\u003c\/li\u003e\n\u003cli\u003e0.5 m silicone tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eKey features\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eConnects to 2\" tri-clamp distilling accessories\u003c\/li\u003e\n\u003cli\u003eReplaces a water-cooled condenser and\/or dephlegmator for water-free distilling\u003c\/li\u003e\n\u003cli\u003e304 grade stainless steel components and product tubes\u003c\/li\u003e\n\u003cli\u003e1060 grade aluminium fins\u003c\/li\u003e\n\u003cli\u003eHigh-temperature, food-grade silicone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eDimensions: H 37 cm x W 22 cm x D 61 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 7.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eMounting on a Still Spirits Boiler Lid or Alembic Dome\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Still Spirits Boiler Lid and Alembic Dome are designed for small to medium setups without heavy, off-centre attachments. They have a bit of flex but will happily support components within these limits:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eTotal column and condenser height up to 1.1 m above the lid or dome\u003c\/li\u003e\n\u003cli\u003eTotal column and condenser weight up to 11 kg, including up to 2 kg of off-centre weight (from a swan neck, lyne arm, or a condenser running parallel to the column) offset up to 160 mm from the main column\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eWe recommend adding external support if:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYour column and condenser go beyond those limits\u003c\/li\u003e\n\u003cli\u003eYour lyne arm is angled or runs out perpendicular from the column, putting a lot of weight well off-centre\u003c\/li\u003e\n\u003cli\u003eYour column and condenser are noticeably leaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eCleaning\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eDust can build up in the fan grill and fins over time. A household vacuum cleaner sorts that out easily.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTo clean the inside, do a run with equal parts white vinegar and drinking water.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eHandle with care\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe metal fins can have sharp edges. Take care when handling, assembling, cleaning or storing the unit, and don’t run your fingers along the fins.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003ePlease note\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eIn Australia and many other countries, distilling alcohol and owning distilling equipment is illegal without the appropriate permits or licences. For guidance, contact your relevant local authorities.\u003c\/p\u003e","brand":"Still Spirits","offers":[{"title":"Default Title","offer_id":67864360354046,"sku":"57002","price":649.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0077\/9832\/5321\/files\/Vortex_Alembic_Front_57002_LR_f0a0a314-544f-4b59-8b4c-a59e1f1ceb49.jpg-3.webp?v=1793072452"}],"url":"https:\/\/brewhq.com.au\/collections\/vortex.oembed","provider":"Brew HQ","version":"1.0","type":"link"}