2.2L Food Grade Nitrogen Bottle - Non-Rechargeable

Used to dispense over 60 litres of cold brew coffee or nitro-stout!

Nitrogen is used in place of CO2 for its low solubility and the creamy head and 'cascade' it produces as dissolved nitrogen quickly comes out of solution when dispensed. This bottle is a one time use, non rechargeable unit. Each bottle contains approx. 240L of nitrogen when calculated at standard temperature and pressure.

Specifications

Cylinder Type: 3 Piece Welded Cro-Molly Alloy
Cylinder Volume: 2.2L
Thread: M10
Gas: Food Grade Nitrogen - N2

Directions:

1. Remove the protection cap from the valve.
2. Connect the cylinder valve onto the regulator. It is recommended that you use a spanner to hold the neck of your Nitrogen cylinder while attaching and detaching the Regulator. Do not overtighten your cylinder into the regulator.
3. Set the outlet flow/pressure on the regulator. Please note to turn off the gas you must remove the regulator from the cylinder.
PLEASE NOTE: If you are removing the regulator at any point you MUST use a spanner to hold the brass neck of the cylinder. Failure to do so could cause the strong adhesive glue to crack and the cylinder detaches from the fitting.
4. Perform a leak test on your system.

To avoid the chance of leaks and returning to an empty bottle, please triple-check every connection point on your system or disconnect your gas cylinder between uses. 

Please note this item cannot be sent with Australia Post.