Digital pH Meter
A pH meter is an essential tool in the arsenal of any brewer, winemaker or distiller.
Instructions:
- Remove protective cap.
-
Rinse the electrode with distilled water and pat dry it with filter paper or cloth.
-
Turn the meter on by pressing "ON/OFF" key.
-
Immerse the pH meter electrode in the solution to be tested (should not be over the immersion line).
-
Stir gently and wait until the reading stabilizes. This may take 30 seconds or longer.
-
After finishing, rinse the electrode with clean water then turn the meter off by pressing "ON/OFF" key again.
- Always replace the protective cap after use.
Specification:
Display: LCD Digital
Accuracy: +/- 0.1
Resolution: 0.01
Operating Temperature: 0~60°C
Measuring Range: 0.00~14.00
Probe Type: Precision glass bulb electrode
Battery: 2 x 1.5V LR44 Batteries - Not Included
Includes:
-
pH Meter
-
Calibration pH Buffer Powder x 2
-
Instruction Manual
- Calibration Screwdriver