Skip to content
$10.00 Perth Metro Delivery on orders over $50.00
$10.00 Perth Metro Delivery on Orders over $50.00
Inkbird Temperature Controller - WiFi ITC-308 - Brew HQ Pty Ltd

Inkbird Temperature Controller - WiFi ITC-308

SKU

Save 20% Save 20%
$79.95
$79.95 - $79.95
$79.95
$63.96
$63.96 - $63.96
$63.96

Easily convert a fridge into a fermentation chamber, simply plug and play!

Now comes with wifi connectivity, view the temperature of your fermenting chamber from anywhere using a phone using the 'inkbirdsmart' app. Includes dual sockets for both cooling (fridge) and heating (heater belt/pad). Inkbirds have a range of settings which can be changed to suit YOU better.

Features：

  • Plug and play design, easy to use. 
  • Support reading with Centigrade or Fahrenheit. 
  • Maximum output load: 1100W(110V). 
  • Temperature calibration, Compressor delay protection for refrigeration control. 
  • High and low temperature alarms are available. 
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time. 
  • Dual display window, be able to display measured temperature and set temperature at the same time. 
  • Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.

Specification：

  • Power: Voltage: 100~230Vac，50/60Hz, Current: 10A, Max Wattage: 1200W(110Vac), 2200W(220Vac)
  • Type of temperature probe: R25℃=100KΩ±1%, R0℃=26.74~27.83KΩ,B25/85℃=3435K±1%
  • Temperature measurement range:-40℃~100℃/-40℉~212℉
  • Temperature display accuracy: 0.1℃ /℉(<100℃/℉), 1℃/℉(>=100℃/℉)
  • Display unit: Celsius ℃ or Fahrenheit ℉
  • Ambient temperature: -20℃~60℃/-4℉~140℉
  • Storage environment: temperature:0℃~60℃/32℉~140℉; 
  • humidity: 20~80%RH(Unfrozen or condensation )
  • Warranty:Controller:2 years warranty ；Temperature Probe:1 year warranty

Package Included:

  • 1 x WIFI ITC-308 Temperature Controller
  • 1 x Manual

Customer Reviews

Based on 5 reviews
80%
(4)
0%
(0)
0%
(0)
20%
(1)
0%
(0)
j
james chapman
Superb

Is a grate product love the ease of on line purchase living remotely

g
giovanni fargnoli
INKBIRD TEMPERATURE CONTROLLER - WIFI ITC-308

Unit worked well for 6 weeks.
Now the WIFI connection does not work and i cannot get it to work again.
I have been in contact with the customer service mob via the app, but they cannot help me.

B
Brian Griffin
Fermentation control

It is working fine and I am. About to do a brew so being able to control the temperature at a stable level will be very important

P
Paul Bray
Inkbird automates T500

Works like a charm.
Fitted thermal probe to T500 water drain.
Used just a few fine copper wires to make the fit snug for good thermal contact.
Considering a bit of thermal paste next time.
Set temperature to 55.C +/- 1.C
And adjusted the water flow (dependant on your water supply) to around where you would normally run your still.
The Inkbird regulated the vapour pressure in the still accordingly via the heating element.
This configuration requires some attention but takes care of a lot of the constant fine tuning.
NOT A SET AND FORGET PROCESS!
Solid clean result.
Highly recommend you give this a go!

T
Torsten Marsden
Easy Temperature Control for Beer Fermentation

The Inkbird Temperature Controller is a really easy way to control your fermentation temperature. It was simple to set up, just plug in to the fridge and mains power. The app is easy to set up and use. I taped the temperature sensor to the side of the fermenter bin underneath a cloth so that the sensor would not be affected by cold air being blown around the fridge. The first fermentation using this is now finished and the brew is bottled. Waiting with excitement to see what difference this makes to the beer!